User's Manual
Table Of Contents
- Using the MC3 System
- Using the Mobile Collection 2.x System
- About the Mobile Collection 2.x System
- GoBook Mounting Systems
- Installing the Mobile Collection 2.x System
- Removing the Mobile Collection 2.x System
- Upgrading to a GoBook XR-1 Laptop
- Using the EkaNet System
- System Maintenance
Installing the MC3 System
Hardware Installation Guide 15
Connecting the Power Cables
Power to the Mobile Collection components is distributed through the junction box on the
side of the sled. There are three power cables that must be connected:
Vehicle power to the junction box
Junction box to the GoBook dock
Junction box to the MC3
There is a fourth outlet on the junction box called AUX. It is for powering the EkaNet radio,
an optional device for mobile demand reset functionality.
The example below shows an MC3 radio and sled for a GoBook XR-1 with all the power
cables connected.
ID
Connection
(Label)
Description
1
Power in to MC3 radio
(POWER IN)
Power receptacle on MC3 radio.
2
Power to EkaNet radio
(AUX)
Connection from junction box to optional EkaNet radio.
Supplies power to the EkaNet radio for mobile demand
reset functionality.
3
Power out to MC3 radio
(RF UNIT)
Connection from junction box to MC3 radio.