User's Manual
Table Of Contents
- Using the MC3 System
- Using the Mobile Collection 2.x System
- About the Mobile Collection 2.x System
- GoBook Mounting Systems
- Installing the Mobile Collection 2.x System
- Removing the Mobile Collection 2.x System
- Upgrading to a GoBook XR-1 Laptop
- Using the EkaNet System
- System Maintenance
Chapter 1 Using the MC3 System
8 Hardware Installation Guide
The PCMCIA slot is on the right side of the GoBook, just below the CD drive.
ID
Description
1
Front of GoBook XR-1
2
PCMCIA slot
3
CD drive
The compact flash card should come installed from the factory. If it is not installed or you
wish to replace cards, use the following procedures.
To insert the flash card adapter
1. Slide the flash card into the PCMCIA adapter.
2. Open the CD drive / PCMCIA slot compartment on the right-hand side of the
GoBook.