User's Manual
Table Of Contents
- Before You Begin
- CCU/Repeater Basics
- Planning a CCU/Repeater Installation
- Installing the Collector or Repeater
- Installation Overview
- Attaching the Local GPS/WAN Antennas
- Attaching the Direct Mount Standard (5.15 dBi) 900 MHz Antenna
- Attaching the Collector or Repeater
- Connecting Cables
- Installing a Local 4G WAN Antenna
- Installing the Battery
- Providing Power
- CCU Installation Wiring Diagram
- Tower Installation
- Solar Powered Installation
- Relocating a CCU or Repeater
- Battery Care and Maintenance
- Detailed Collector or Repeater Specifications
- Port and Protocol Requirements
- Status and Diagnostics
- Changing the Repeater Password
- Antenna Line Sweeps Procedure
- Anritsu Site Master Calibration
- Testing on a Network Device with a Remotely-Mounted 900 MHz Antenna
- Understanding Party Responsibilities
- Itron ChoiceConnect Antenna and Line Sweep Test Form
- Itron ChoiceConnect 900 MHz Antenna Specifications
- Typical Coaxial Cable Specification Summary Table
- Sample Sweeps Output
- Grounding Specifications
- Understanding Grounding and Bonding
- Understanding the Ohms Level
- Reducing the Ohms level
- Using a Megger
- Adjusting the Routing of the Grounding Conductor
- Supplier General Requirements and Equipment Competencies
- Exterior Grounding System Design for Concentrators
- Equipment Buried Ground Ring
- Chemical Ground Rod Installation
- Itron Concentrator Equipment
- Installing Coax Ground Kits
- Collector Sites with Indoor Itron TCU / CCU Equipment
- Grounding Rooftop Network Devices
- Down Conductor Installation
- Cold Water Pipe Option
- Building Steel Option
- Antenna and Coax Grounding - Rooftops
- Cable Tray Grounding
- Water Tower Grounding
- New Wooden and Concrete Antenna Poles
- Equipment Shelter Grounding
- Repeaters on Communication Tower Sites
- Repeaters on Rooftops
- Multiple Story Site Ground System
- Down Conductors Installation - Building / Shelter Penetrations
- Down Conductors Installation - Limits of Bend Radius
- Down Conductors Installation Connection Methods
- Cable Entrance Facilities
- Clamp-On Ground Resistance Testing
- Understanding Party Responsibilities
- Understanding Grounding and Bonding
- Index
Ports and Protocols
TDC-0971-011 CCU 100 and Repeater 100 Installation Guide 69
Proprietary and Confidential
Fixed Network database/NPA server outbound traffic
Source
address
Source
port
Destination
address
Destination
port
Protocol
Required
for
operation
Purpose
Fixed Network
database server
Any
Collectors (any)
4443**
HTTPS
Yes
Collector commands and
diagnostic portal.
Fixed Network
database server
Any initial
configuration
router DHCP IP
addresses
4443** HTTPS Yes Collector shutdown, reboot, etc.
Collector commands and
diagnostic portal router required
for v4.2 collectors only.
Fixed Network
database server
Any spatial.virtualear
th.net
443 HTTPS Yes Geocoding web service for
device maintenance.
Fixed Network
database server
Any
www.mlogonlin
e.com
80
HTTP
Yes
Leak sensor data export to
mlogonline.
Fixed Network
workstation
Any dev.virtualearth.
net
80 HTTP Yes Virtual Earth access for Network
Administrative Application
(NAA) mapping.
(Microsoft may use other URLs
such as those noted in the second
group).
ecn.dev.virtuale
arth.net
80 HTTP
common.virtual
earth.net
443 HTTPS
staging.commo
n.virtualearth.ne
t
80
HTTP
mappoint-
cds.live.com
443 HTTPS
renderv3.staging
.mappoint.net
80
HTTP
(t0, t1, t2,
t3).tiles.virtualea
rth.net
80 HTTP
vemapcontrol.v
o.msecnd.net
80
HTTP
dctfe.maps.glbd
ns.microsoft.co
m
80 HTTP
platform.maps.g
lbdns.microsoft.
com
80
HTTP