User's Manual

General Information
CENTRON Meter Technical Reference Guide 1-7
Technical Data
Meets applicable standards:
• ANSI C12.1-1995
• ANSI C12.10-1997
• ANSI C12.16 (Solid State Meters)
• ANSI C12.18 (Optical Communications Protocol)
• ANSI C12.20 (Class 0.5) - 1998
• IEC 61000-4-4
• IEC 61000-4-2
Dimensions
The following dimensional measurements are shown in inches and (centimeters).
Figure 1.6 Dimensions
A B C D E
Polycarbonate
6.29 (16.00) 6.95 (17.70) 2.70 (6.90) 3.16 (8.00) 4.53(11.50)
Glass
6.42 (16.30) 6.95(17.70) 3.17 (8.10) 3.64 (9.20) 5.01 (12.70)