User's Manual

Safety
26 900 MHz Belt-Clip Radio User’s Guide
Proprietary and Confidential
• Inspect the AC adapter before use.
Do not use it if there are any signs of damage or deterioration.
• Make sure all connectors are firmly connected.
• Avoid mechanical strain to cables and connectors.
• Make sure the adapter’s green LED is lit while the adapter is in
use.
• In the event of overloading, the AC adapter is designed to be
fail-safe and may stop functioning.
• Do not try to use the AC adapter to power any other equipment.
• Avoid use in dusty, damp, or contaminated environments.
Warning The AC power adapter contains hazardous
voltage. It contains no user-serviceable parts. Do not
try to open or modify it.
Usage in Hazardous Locations
This device is suitable for use in Class 1, Division 2, Groups A, B, C,
D locations. It should only be used with computer systems approved
for use in hazardous locations.
Warning—Explosion Hazard Do not replace battery or
antenna unless power has been switched off or the area is
known to be non-hazardous.
Avertissement—Risque d’Explosion Couper le courant
ou s’assurer que l’emplacement est designe non
dangereux avant de replacer le composants.
Warning—Explosion Hazard Do not disconnect
equipment unless power has been switched off or the area
is known to be non-hazardous.
Avertissement—Risque d’Explosion Avant de
deconnecter l’equipement, couper le courant ou s’assurer
qu l’emplacement is designe non dangereux.