User's Manual

Maintaining Your 900 MHz Belt Clip Radio
20 900 MHz Belt-Clip Radio User’s Guide
Proprietary and Confidential
To charge the battery through the USB cable
1. Connect the Hirose connector (1) on one end of the USB cable to
the BCR’s communication port (see USB Communication Port).
2. Connect the USB connector (2) on the opposite end to your PC's
USB port.
When the BCR is connected to a PC through its USB cable but not
drawing power through its cradle (see To charge the battery through
the cradle, following), the USB cable provides the BCR with power
from the PC as well as with USB communications.
Tip The charge time may be much longer through the
USB cable than through the AC adapter and cradle, as
the PC can supply only limited power.
Bluetooth communication is not possible when the USB
cable is connected.