User's Manual

900 MHz Belt Clip Radio Basics
900 MHz Belt-Clip Radio User’s Guide 5
Proprietary and Confidential
Caution Use only Itron-approved and -supplied
antennas with the 900 MHz Belt Clip Radio. This device
has been designed to operate with an antenna having a
maximum gain of 5.0 dBi. Antennas having a gain
greater than 5.0 dBi are strictly prohibited for use with
this device. The required antenna impedance is 50
ohms.
Us
e only Itron-approved accessories with this device.
To install the battery
1. Unscrew the four screws that secure the battery compartment
cover to the back of the 900 MHz Belt Clip Radio.
Remove the cover.
2. Four wires protrude from the top of the battery and end in a
small connector.