User's Manual

Operation: CVSO OpenWay Register
CENTRON® OpenWay™ Meter Technical Reference Guide 47
 Diagnostic 1 On—diagnostic 1 condition occurred
 Diagnostic 1 Off—diagnostic 1 condition went away
 Diagnostic 2 On—diagnostic 2 condition occurred
 Diagnostic 2 Off—diagnostic 2 condition went away
 Diagnostic 3 On—diagnostic 3 condition occurred
 Diagnostic 3 Off—diagnostic 3 condition went away
 Diagnostic 4 On—diagnostic 4 condition occurred
 Diagnostic 4 Off—diagnostic 4 condition went away
 DST Time Change—DST adjustment forward or backward has occurred
 Event Log Cleared—Event Log was cleared by programming software
 Full Scale Overflow—see Non-Fatal Error 6 (see "Non-Fatal Errors" on page 63) for
description
 Load Profile Error—see Non-Fatal Error 5 (see "Non-Fatal Errors" on page 63) for
description
 Logon Successful—a user or option board logged on successfully to the meter
 Loss of Phase—see Non-Fatal Error 2 (see "Non-Fatal Errors" on page 63) for
description
 Loss of Phase Restored—phase voltage was restored
 Low Battery—see Non-Fatal Error 1 (see "Non-Fatal Errors" on page 63) for
description
 Meter Reprogrammed—meter was initialized or reconfigured
 Power Outage—power was lost
 Power Restored—power was restored
 Rate Change—TOU rate change occurred
 Register Self Read—self read occurred
 Reverse Power Flow—see Non-Fatal Error 4 (see "Non-Fatal Errors" on page 63) for
description
 Reverse Power Flow Restored—delivered power flow resumed after reverse flow
exceeded a configured threshold
 Season Change
—TOU season change occurred
 Security Fail—logon with security code failed
 Security Pass—logon with security code succeeded
 SiteScan Error—a SiteScan error occurred
 Test Mode Entered—Test Mode or Alternate Test Mode was entered
 Test Mode Exited—Test Mode or Alternate Test Mode was exited
 Time Changed—a time adjustment forward or backward occurred
 TOU Schedule Error—see Non-fatal Error 3 (see "Non-Fatal Errors" on page 63) for
description
Draft