Installation Guide
Table Of Contents
- Table of Contents
- 1 Important Safety and Compliance Information
- U.S. and Canadian Patent Numbers
- USA, FCC Part 15 Spectrum Compliance
- Canada, ISED Spectrum Compliance
- RF Exposure (FCC/ISED)
- Australia, ACMA Spectrum Compliance
- Transportation Classification
- Modifications, Repairs, Installation, and Removal
- Lithium Battery Safety
- Equipment Repairs
- Intrinsic Safety
- Electrostatic Ignition Hazard
- Module Cleaning
- Do Not Drop
- 2 About the OpenWay® Riva Remote 500G ERT® Module
- 3 Mounting
- 4 Programming
- 5 Specific Meter Manufacturer Installation
- 6 Diaphragm Meter Installation
- 7 Optional Sealant Application Instructions
- 8 Using Gel-cap Connectors to Complete Wiring Connections
2. Itron recommends sealant application after the remote mod-
ule is installed so the cable is in the installation position. Use
the sealant (ADH-5106-000) to fill the gap.
3. Use enough sealant to fill the gap. Wipe off any excess
sealant and replace the cover on the sealant tube.
25 July 2019 TDC-1678-005 92
500GERT®Module Installation Guide, RemoteMount Chapter 7 Optional sealant application instructions