Installation Guide
Table Of Contents
- Table of Contents
- 1 Important Safety and Compliance Information
- U.S. and Canadian Patent Numbers
- USA, FCC Part 15 Spectrum Compliance
- Canada, ISED Spectrum Compliance
- RF Exposure (FCC/ISED)
- Australia, ACMA Spectrum Compliance
- Transportation Classification
- Modifications, Repairs, Installation, and Removal
- Lithium Battery Safety
- Equipment Repairs
- Intrinsic Safety
- Electrostatic Ignition Hazard
- Module Cleaning
- Do Not Drop
- 2 About the OpenWay® Riva Remote 500G ERT® Module
- 3 Mounting
- 4 Programming
- 5 Specific Meter Manufacturer Installation
- 6 Diaphragm Meter Installation
- 7 Optional Sealant Application Instructions
- 8 Using Gel-cap Connectors to Complete Wiring Connections
Equipment Repairs
Warning! Only authorized Itron personnel should attempt repairs on Itron equipment.
Attempts to do so by others might void any maintenance contract with your company.
Unauthorized service personnel might also be subject to shock hazard on some Itron
equipment if removal of protective covers is attempted.
Intrinsic Safety
Warning! Substitution of components may impair intrinsic safety.
Electrostatic Ignition Hazard
Warning! Verify the area is not hazardous when installing, servicing, cleaning, or
touching the Itron device.
Module Cleaning
Warning! Clean only with a damp cloth.
Do Not Drop
Warning! While Itron modules are designed to withstand a drop, dropping the mod-
ule may damage the device and void the warranty.
25 July 2019 TDC-1678-005 9
500GERT®Module Installation Guide, RemoteMount Chapter 1 Important Safety and Compliance Information