Installation Guide
Table Of Contents
- Table of Contents
- 1 Important Safety and Compliance Information
- U.S. and Canadian Patent Numbers
- USA, FCC Part 15 Spectrum Compliance
- Canada, ISED Spectrum Compliance
- RF Exposure (FCC/ISED)
- Australia, ACMA Spectrum Compliance
- Transportation Classification
- Modifications, Repairs, Installation, and Removal
- Lithium Battery Safety
- Equipment Repairs
- Intrinsic Safety
- Electrostatic Ignition Hazard
- Module Cleaning
- Do Not Drop
- 2 About the OpenWay® Riva Remote 500G ERT® Module
- 3 Mounting
- 4 Programming
- 5 Specific Meter Manufacturer Installation
- 6 Diaphragm Meter Installation
- 7 Optional Sealant Application Instructions
- 8 Using Gel-cap Connectors to Complete Wiring Connections
Meter model Meter notes Module
type
Itron
part
number
ERT module notes
RM Series STD CTR
600-5600
TC 2000-23000
Meter must have fact-
ory-installed pulser
with connector out-
put. Purchase cable
interface from man-
ufacturer.
500G
remote
ERG-
7000-503
RM Series Elec-
tronically compensated
meter ECM2 600-56000
Meter must have con-
nector pin with fact-
ory-installed pulse
output. Purchase cor-
rect cable interface
from Romet.
AdEM
®
Series Cor-
rectors including
AdEM-S
®
, AdEM-T
®
,
and AdEM
®
-PTZ
Must be configured to
350mS of output
pulse spacing and
30mS of output pulse
width.
Romet installation overview
500G ERT module installation with the Romet series correctors involves the following tasks.
1. Programming or verifying the that corrector is set up to work with the 500G remote ERT mod-
ule.
Programming requires a computer loaded with the RometLink software and a Romet com-
puter-to-corrector communication cable.
2. Connecting the ERT module to the corrector. Installation requires the following materials.
■
Connection options, Cannon cable (part number: 43-035-40*) pigtail option
■
Romet AdEM communication cable, available from Romet
25 July 2019 TDC-1678-005 68
500GERT®Module Installation Guide, RemoteMount Chapter 5 Specific Meter Manufacturer Installation