Installation Guide
Table Of Contents
- Table of Contents
- 1 Important Safety and Compliance Information
- U.S. and Canadian Patent Numbers
- USA, FCC Part 15 Spectrum Compliance
- Canada, ISED Spectrum Compliance
- RF Exposure (FCC/ISED)
- Australia, ACMA Spectrum Compliance
- Transportation Classification
- Modifications, Repairs, Installation, and Removal
- Lithium Battery Safety
- Equipment Repairs
- Intrinsic Safety
- Electrostatic Ignition Hazard
- Module Cleaning
- Do Not Drop
- 2 About the OpenWay® Riva Remote 500G ERT® Module
- 3 Mounting
- 4 Programming
- 5 Specific Meter Manufacturer Installation
- 6 Diaphragm Meter Installation
- 7 Optional Sealant Application Instructions
- 8 Using Gel-cap Connectors to Complete Wiring Connections
Channel A
Corrected
Volume
Channel B
UncorrectedVolume
Channel C Pulse Output Spacing
Instrunment- Pulse
Output
Options
#56 #93 #57 #94 #58 #95 #115 #1014 #1015 Terminal
Board Con-
nections / Wir-
ing
Wiring
Ver-2(3)
Form A
or
2=2.0sec
or
4=0.5sec
Blue and White
ERT wires go
to Y
Connection
must be on
same terminal
board channel
(for example,
Ka/Ya; kb/Yb;
Kc/Yc)
Ka, Ya=Cha-
nnel A
Kb, Yb=Cha-
nnel B
Kc, Yc=Cha-
nnel C
Pulse
board Ver-
3(2)
FormC1
FormA
2
Cor
Vol
Mini with Form
A main board
Main
board
Type-2*
2
Cor
Vol
Mini-AT
JB29,JB30
&JB31
Jumpered
for
FormA*
2
Cor
Vol
2
Unc
Vol
Mini-Max All main
boards
2
Cor
Vol
2
Unc
Vol
1=1.0sec
or
2=2.0sec
TCI FormA
main
board
2
Cor
Vol
2
Cor
Vol
Itron
100G
Itron
100G
Itron Meter Installation
See for Itron meter installation information for the A-Series (1A, 305, 400, 675, and 1000)
meters.
25 July 2019 TDC-1678-005 65
500GERT®Module Installation Guide, RemoteMount Chapter 5 Specific Meter Manufacturer Installation