Installation Guide
Table Of Contents
- Table of Contents
- 1 Important Safety and Compliance Information
- U.S. and Canadian Patent Numbers
- USA, FCC Part 15 Spectrum Compliance
- Canada, ISED Spectrum Compliance
- RF Exposure (FCC/ISED)
- Australia, ACMA Spectrum Compliance
- Transportation Classification
- Modifications, Repairs, Installation, and Removal
- Lithium Battery Safety
- Equipment Repairs
- Intrinsic Safety
- Electrostatic Ignition Hazard
- Module Cleaning
- Do Not Drop
- 2 About the OpenWay® Riva Remote 500G ERT® Module
- 3 Mounting
- 4 Programming
- 5 Specific Meter Manufacturer Installation
- 6 Diaphragm Meter Installation
- 7 Optional Sealant Application Instructions
- 8 Using Gel-cap Connectors to Complete Wiring Connections
10. Insert the gel-connected wires into the
threaded gray adapter plate hole.
11. Replace the strain relief and tighten until secure.
Honeywell Instrument Programming and Requirements
The Honeywell MasterLink SQL software is used to configure Honeywell products.
Important! This information is subject to change without notice. Refer to the Honey-
well MasterLink SQL product documentation to verify the most current information
about programming and configuring the corrector for use with the 500G remote ERT
module.
Honeywell Software Settings
1. Connect the interface cable from the Honeywell instrument to a PC loaded with the MasterLink SQL
software.
2. Open the MasterLink SQL software. The soft-
ware opens and reports a "Not Connected" status.
The Site List window automatically opens after the software detects an instrument.
3. Select the Honeywell instrument type from the Instrument List on the right of the screen.
Important: You must select the correct instrument type. Selecting the incorrect type causes com-
munication errors.
4. The status indicator in the lower left corner of the MasterLink SQL software displays the connection
status as Connected (instrument type).
25 July 2019 TDC-1678-005 63
500GERT®Module Installation Guide, RemoteMount Chapter 5 Specific Meter Manufacturer Installation