Installation Guide
Table Of Contents
- Cellular 500W Module Remote Installation Guide
- Contents
- New in This Document
- 1 Important Safety and Compliance Information
- 2 About the Itron Cellular 500W Module
- 3 Initializing and Connecting
- 4 Installing the Cellular 500W Remote Module
- 5 Completing Gel-cap Connections Using the Itron Splice Kit
- 6 Using the Itron Cable Armor
- 7 Troubleshooting
7.
Warning! Use Itron mounting screws (SCR-0010-005). Using the wrong
mounting screws could crack the plastic module housing.
8. If you have not already done so, connect the register to the water meter and fully tighten the
mounting screw (1) as directed by Badger Meter.
Note: Mount the register on the meter in one of four different positions with respect to the
direction of water flow (refer to the manufacturer's installation directions).
Cellular 500W Module Remote Installation Guide 4 Installing the Cellular 500W Remote Module
10 March 2021 815-0618-00 REV 000 Itron, Inc. Page 36 of 43