Installation Guide
Table Of Contents
- Cellular 500W Module Remote Installation Guide
- Contents
- New in This Document
- 1 Important Safety and Compliance Information
- 2 About the Itron Cellular 500W Module
- 3 Initializing and Connecting
- 4 Installing the Cellular 500W Remote Module
- 5 Completing Gel-cap Connections Using the Itron Splice Kit
- 6 Using the Itron Cable Armor
- 7 Troubleshooting
4. Slide the Cellular 500W remote module lug slot onto the mounting screw, pushing the
Cellular 500W remote module upward until the screw head is all the way into the slot.
5. Screw the Cellular 500W remote module to the wall using the remaining two mounting
screws.
6. Insert a tamper seal over each mounting screw and drive into place with a nut driver or a
similar tool.
Cellular 500W Module Remote Installation Guide 4 Installing the Cellular 500W Remote Module
10 March 2021 815-0618-00 REV 000 Itron, Inc. Page 30 of 43