Installation Guide
Table Of Contents
- Cellular 500W Module Remote Installation Guide
- Contents
- New in This Document
- 1 Important Safety and Compliance Information
- 2 About the Itron Cellular 500W Module
- 3 Initializing and Connecting
- 4 Installing the Cellular 500W Remote Module
- 5 Completing Gel-cap Connections Using the Itron Splice Kit
- 6 Using the Itron Cable Armor
- 7 Troubleshooting
If the pipe is at a 45-degrees angle up to the left, install the adapter plate as shown.
If the pipe is horizontal, install the adapter plate as shown.
Mounting on the Adapter Plate
1. Locate the two 1-inch Cellular 500W remote module mounting screws in the pipe mount kit.
2. Slide the Cellular 500W remote module back cover onto the adapter, pushing up to secure
the lug adapter in the lug slot.
Cellular 500W Module Remote Installation Guide 4 Installing the Cellular 500W Remote Module
10 March 2021 815-0618-00 REV 000 Itron, Inc. Page 27 of 43