Installation Guide
Table Of Contents
- Cellular 500W Module Pit Installation Guide
- Contents
- New in This Document
- 1 Important Safety and Compliance Information
- 2 About the Itron Cellular 500W Module
- 3 Installing the Cellular 500W Pit Module
- 4 Initializing, Connecting, and Programming the Pit Module
- 5 Using the Itron Cable Armor
- 6 Connecting the Inline Connector
- 7 Completing Gel-cap Connections Using the Itron Splice Kit
- A Troubleshooting
Pit module wire color
Red (data)
1
Black (power/clock) White (ground)
Register manufacturer Register screw terminal
AquaMaster III
Elster AMCO
SM 700 (Severn Trent)
Q200 (Sensus Protocol)
evoQ4 (Sensus Protocol)
Green Red Black
Elster AMCO evoQ4 Mag Red White Black
Itron (Actaris) Cyble Coder Green Red Black
Kamstrup flowIQ2100 Green Red Black
MasterMeter
AccuLinx
Octave
Green Red Black
McCrometer Data port/green Clock/red Gnd port/black
Metron Farnier OER Green Red Black
Mueller (Hersey)
Translator
SSR
Green Red Black
Sensus
ECR
ICE
iPERL
SRII
OMNI
Green Red Black
Neptune
ProRead
ProRead AutoDetect
E-Coder
ARB-V
Red Black Green
Performance ETR Green Red Black
RG3 Tomahawk Green Red Black
Siemens
Mag Meter
92 91 93
Cellular 500W Module Pit Installation Guide 4 Initializing, Connecting, and Programming the Pit Module
09 March 2021 815-0617-00 REV000 Itron, Inc. Page 30 of 41