Installation Guide
Table Of Contents
- Cellular 500G Module Remote Installation Guide
- Contents
- New in This Document
- 1 Important Safety and Compliance Information
- U.S. and Canadian Patent Numbers
- USA, FCC Part 15 Spectrum Compliance
- Modifications, Repairs, Installation, and Removal
- Canada, ISED Spectrum Compliance
- RF Exposure (FCC/ISED)
- Transportation Classification
- Lithium Battery Safety
- Equipment Repairs
- Intrinsic Safety
- Electrostatic Ignition Hazard
- Module Cleaning
- Do Not Drop
- 2 About the Itron Cellular 500G Remote Module
- 3 Mounting
- 4 Programming
- 5 Specific Meter Manufacturer Installation
- 6 Diaphragm Meter Installation
- 7 Using Gel-cap Connectors to Complete Wiring Connections
- 8 Optional Sealant Application Instructions
4. The connector is properly crimped when the top of the
moveable yellow center (1) is flush with the top of the connector
body (2).
Warning! Crimping the connector forces sealant out of the connector. The
sealant protects the inside of the connector against insects, moisture, or other
contaminants. The sealant may cause minor eye and skin irritation. Avoid eye
contact. For more information or Safety Data Sheet (SDS) information, visit the
manufacturer website.
Cellular 500G Module Remote Installation Guide 7 Using Gel-cap Connectors to Complete Wiring Connections
10 March 2021 815-0622-00 REV 000 Itron, Inc. Page 90 of 91