Installation Guide

Table Of Contents
6
Diaphragm Meter Installation
This chapter provides the instructions to install remote modules (Itron part number ERG-7000-
501 with 2.5-foot cable and encoder) on diaphragm gas meters where a direct mount module is
not possible.
Meter model Meter notes Itron part number module notes
Elster American 10 Metric
(10B)
Originally manufactured by
Metric Metal Works
ERG-7000-501
Itron 1A Flat-face meter where meter
body and 1A adapter plate
have interference fit issue
causing direct mount
solution to be non-
compatible
Itron 305 #2 flat-face meter
Itron 400 #3 flat-face meter
Itron 675, 1000 Front-mount index ERG-7000-501 Requires a thicker
gasket for magnet hub
to clear index box.
1-hole gasket: FAB-
0014-001
2-hole gasket: FAB-
0014-002
3-hole gasket: FAB-
0014-003
Diaphragm Meter Installation Overview
Diaphragm meter installation involves the following tasks:
1. Programming the module. For programming information, see Programming on page 21.
2. Mounting the remote module. For mounting information, see Mounting on page 16 .
Mounting options include:
Wall mount on a sheet metal surface
Pipe mount using the Itron pipe mount kit CFG-0005-003
3. Connecting the remote module to the diaphragm meter.
The following materials are required for each remote module installation to a diaphragm gas
meter. Purchase these items from Itron.
10 March 2021 815-0622-00 REV 000 Itron, Inc. Page 80 of 91