Installation Guide
Table Of Contents
- Cellular 500G Module Remote Installation Guide
- Contents
- New in This Document
- 1 Important Safety and Compliance Information
- U.S. and Canadian Patent Numbers
- USA, FCC Part 15 Spectrum Compliance
- Modifications, Repairs, Installation, and Removal
- Canada, ISED Spectrum Compliance
- RF Exposure (FCC/ISED)
- Transportation Classification
- Lithium Battery Safety
- Equipment Repairs
- Intrinsic Safety
- Electrostatic Ignition Hazard
- Module Cleaning
- Do Not Drop
- 2 About the Itron Cellular 500G Remote Module
- 3 Mounting
- 4 Programming
- 5 Specific Meter Manufacturer Installation
- 6 Diaphragm Meter Installation
- 7 Using Gel-cap Connectors to Complete Wiring Connections
- 8 Optional Sealant Application Instructions
Honeywell Instrument Installation
Note: This meter is compatible only with devices running on the OpenWay Riva network.
This section provides installation instructions for the remote module on the following compatible
Honeywell Instruments.
Meter model Meter notes Module
type
Itron part
number
module notes
Mini-AT
Mini-Max
EC-AT
Pressure and temperature electronic
volume instruments. Instruments must
have a Form A board. Form C is NOT
supported. Item #56 Pulse Scaling
Factor must be 2.0. Item #96 Cor Vol
Display must be 7, 6, 5, or 4 digits (1, 2,
3, or 4 blanks). Item #115 Output Pulse
Code must be set at 1, 2, or 4. For
connection to Mini-Max only, Item #115
must be set at 1 or 2. Item 124 wake up
setting on Honeywell corrector must be
set to 1. Compatible corrector firmware
versions are 2.5020 and 2.73.
500G remote ERG-7000-502
Cellular 500G Module Remote Installation Guide 5 Specific Meter Manufacturer Installation
10 March 2021 815-0622-00 REV 000 Itron, Inc. Page 54 of 91