Installation Guide

GE Oil and Gas IMC/W2, or MC2 with the GE Mounting Bracket Kit
Note: This mounting option requires that you follow the installation instructions to attach the
meter maufacturer cable prior to completing this mounting option. This configuration requires
the GE mounting bracket kit available from GE Oil and Gas (GE part number 057783-000).
The kit includes the listed materials.
Quantity Description GE Dresser part number
1 Mounting bracket 015951-000
1 Screw, 8-32 x 7/16-inch 000163-277
2 Screw, 8-32 x 3/4-inch 000163-282
3 Nut, 8-32 012829-005
4 Spacer, #10 053669-001
5 module/bracket mounting screw,
M6 x 20 mm
013444-002
Important! The GE Oil and Gas mounting bracket kit does not include the
cable required to connect the remote module to the Amphenal connector on the
IMC\W2.
Completing the Bracket Installation
1. Insert the 8-32 x 7/16-inch screw (1) into the top
of the mounting bracket. Insert the two 8-32 x 3/4-
inch screws (2) into the bottom of the mounting
bracket.
2. Insert one 3/32-inch nut on the top 7/16-inch
bracket screw. Slide the 500G remote module
mounting lug over the top of the bracket screw and
nut.
Cellular 500G Module Remote Installation Guide 5 Specific Meter Manufacturer Installation
10 March 2021 815-0622-00 REV 000 Itron, Inc. Page 44 of 91