Installation Guide
Table Of Contents
- Cellular 500G Module Remote Installation Guide
- Contents
- New in This Document
- 1 Important Safety and Compliance Information
- U.S. and Canadian Patent Numbers
- USA, FCC Part 15 Spectrum Compliance
- Modifications, Repairs, Installation, and Removal
- Canada, ISED Spectrum Compliance
- RF Exposure (FCC/ISED)
- Transportation Classification
- Lithium Battery Safety
- Equipment Repairs
- Intrinsic Safety
- Electrostatic Ignition Hazard
- Module Cleaning
- Do Not Drop
- 2 About the Itron Cellular 500G Remote Module
- 3 Mounting
- 4 Programming
- 5 Specific Meter Manufacturer Installation
- 6 Diaphragm Meter Installation
- 7 Using Gel-cap Connectors to Complete Wiring Connections
- 8 Optional Sealant Application Instructions
Itron part number Description
CFG-0005-003 Pipe mount kit contents:
■ 2 band clamps
■ 2 tamper seals
■ 1 pipe bracket
■ 2 cable ties
■ 1 adapter plate
■ the following screws:
1. SCR-0215-001 (2) #8-16 x ½ inch slotted pan-head
tapping screw, corrosion-resistant steel. Attaches
the adapter plate to the pipe bracket.
2. SCR-0215-002 (2) #8-16 1-inch slotted pan-head
tapping screw, corrosion-resistant steel. Attaches
the module to the adapter plate.
Completing the Installation
1. Remove the pipe bracket and clamp from the kit.
2. Loosen the band clamp screw until the end of the band
releases.
3. Push the end of the clamp's band through the holes in
the pipe bracket as shown.
Cellular 500G Module Remote Installation Guide 3 Mounting
10 March 2021 815-0622-00 REV 000 Itron, Inc. Page 17 of 91