Installation Guide
Table Of Contents
- Cellular 500G Module Remote Installation Guide
- Contents
- New in This Document
- 1 Important Safety and Compliance Information
- U.S. and Canadian Patent Numbers
- USA, FCC Part 15 Spectrum Compliance
- Modifications, Repairs, Installation, and Removal
- Canada, ISED Spectrum Compliance
- RF Exposure (FCC/ISED)
- Transportation Classification
- Lithium Battery Safety
- Equipment Repairs
- Intrinsic Safety
- Electrostatic Ignition Hazard
- Module Cleaning
- Do Not Drop
- 2 About the Itron Cellular 500G Remote Module
- 3 Mounting
- 4 Programming
- 5 Specific Meter Manufacturer Installation
- 6 Diaphragm Meter Installation
- 7 Using Gel-cap Connectors to Complete Wiring Connections
- 8 Optional Sealant Application Instructions
Operational Specifications
Operational specifications Description
Operating temperatures -40° to 158° F (-40° to +70° C)
Operating humidity 5 to 95 percent relative humidity
Data integrity Verified in every data message
Device Firmware Functionality
This section lists the remote module device firmware information and lists functionality by
version.
Part Number Global
Software
Release
(GSR)
Version
FDM Check
Endpoint
Firmware
Version
Over-the-Air
Firmware Part
Number
Firmware Functionality
FMW-
xxxx-
xxx1601-
004 [4.4.2]
4.15.4 1.3.74.4.0 DFW-xxx-xxx
■ Initial firmware release
■ IPv6 Adressable
■ Network Mode
■ Mobile Mode
■ 60-minute interval data
Related Documents
■
OpenWay Collection Manager Operational Guidelines
■
OpenWay Riva Collection Manager Device Interface Guide
■
Gas and Telemetry Module Meter Compatibility List
■
OpenWay Riva Gas Devices Ordering Guide
■
Cellular 500G Module Specification Sheet
■
Field Deployment Manager Tools Mobile Application Guide
■
Field Deployment Manager Tools Configuration Guide
■
Field Deployment Manager Field Representative Guide
Cellular 500G Module Remote Installation Guide 2 About the Itron Cellular 500GRemote Module
10 March 2021 815-0622-00 REV 000 Itron, Inc. Page 15 of 91