Installation Guide
Table Of Contents
- Cellular 500G Module Remote Installation Guide
- Contents
- New in This Document
- 1 Important Safety and Compliance Information
- U.S. and Canadian Patent Numbers
- USA, FCC Part 15 Spectrum Compliance
- Modifications, Repairs, Installation, and Removal
- Canada, ISED Spectrum Compliance
- RF Exposure (FCC/ISED)
- Transportation Classification
- Lithium Battery Safety
- Equipment Repairs
- Intrinsic Safety
- Electrostatic Ignition Hazard
- Module Cleaning
- Do Not Drop
- 2 About the Itron Cellular 500G Remote Module
- 3 Mounting
- 4 Programming
- 5 Specific Meter Manufacturer Installation
- 6 Diaphragm Meter Installation
- 7 Using Gel-cap Connectors to Complete Wiring Connections
- 8 Optional Sealant Application Instructions
■
The lithium battery may cause a fire or chemical burn if it is not disposed of properly.
■
Do not recharge, disassemble, heat above 100° Celsius (212° Fahrenheit), crush, expose to
water, or incinerate the lithium battery.
■
Keep the lithium battery away from children.
■
Fire, explosion, and severe burn hazards
Equipment Repairs
Warning! Only authorized Itron personnel should attempt repairs on Itron equipment.
Attempts to do so by others might void any maintenance contract with your company.
Unauthorized service personnel might also be subject to shock hazard on some Itron
equipment if removal of protective covers is attempted.
Intrinsic Safety
Warning! Substitution of components may impair intrinsic safety.
Electrostatic Ignition Hazard
Warning! Verify the area is not hazardous when installing, servicing, cleaning, or
touching the Itron device.
Module Cleaning
Warning! Clean only with a damp cloth.
Do Not Drop
Warning! While Itron modules are designed to withstand a drop, dropping the
module may damage the device and void the warranty.
Cellular 500G Module Remote Installation Guide 1 Important Safety and Compliance Information
10 March 2021 815-0622-00 REV 000 Itron, Inc. Page 10 of 91