Installation Guide
Table Of Contents
- Cellular 500W Remote Module Installation Guide
- Contents
- New in This Document
- 1 Introduction
- 2 Initialization, Connection, and Programming
- 3 Setup and Installation
- 4 Completing Gel-cap Connections Using the Itron Splice Tube Kit
- 5 Troubleshooting
- 6 Important Safety and Compliance Information
6. Insert the connectors and wires into the splice tube until the connectors and wires are
completely immersed in the non-conductive gel material.
7. Separate the cable wires to the sides and close the splice tube cover.
8. Remove any leftover materials from the customer premises.
Cellular 500W Remote Module Installation Guide 4 Completing Gel-cap Connections Using the Itron Splice Tube Kit
October 11, 2021 815-0618-00 REV 000 Itron, Inc. Page 40 of 44
DRAFT