Installation Guide
Table Of Contents
- Cellular 500W Remote Module Installation Guide
- Contents
- New in This Document
- 1 Introduction
- 2 Initialization, Connection, and Programming
- 3 Setup and Installation
- 4 Completing Gel-cap Connections Using the Itron Splice Tube Kit
- 5 Troubleshooting
- 6 Important Safety and Compliance Information
Backplate Installation
After the connections are made to the register and optional telemetry device, attach the
Cellular 500W's backplate.
Attaching the Backplate
1. Route the register cable and telemetry device cable through the dual-port backplate.
Ensure that the cable strain reliefs are inside the module housing and backplate assembly.
2. Route the register cable through the bottom backplate cable cutout and telemetry device
cable through the top backplate cable cutout.
Cellular 500W Remote Module Installation Guide 3 Setup and Installation
October 11, 2021 815-0618-00 REV 000 Itron, Inc. Page 20 of 44
DRAFT