User's Manual
Table Of Contents
- Before You Begin
- Introduction
- 2.4ZR OpenWay Range Extender Configuration and Installation
- Configuration and Installation Checklist
- Required Configuration Tools
- 2.4ZR OpenWay Range Extender Configuration Overview
- Configuring the 2.4ZR OpenWay Range Extender
- Reconfiguring or Reading an Installed 2.4ZR OpenWay Range Extender
- Selecting a Mounting Location
- Linking to a CENTRON Meter
- Linking to a 2.4GZ OpenWay Gas Module
- Installing the 2.4ZR OpenWay Range Extender
- Troubleshooting
Introduction
TDC-0832-001 2.4ZR OpenWay® Range Extender Installation Guide 3
Proprietary and Confidential
Specifications
The 2.4ZR OpenWay Range Extender is designed for outdoor installation and operation. The functional and
operational specifications are listed below.
Functional Specifications
Description
Power source
Lithium battery pack
Tamper detection
Magnetic tamper
FCC compliance
Part 15 certified
Intrinsic safety
UL Class 1, Division 2, Groups C and D
Product identification
Numeric, bar-code, and serial number
Construction materials
Polycarbonate, encapsulated electronics
Operational Specifications
Description
Operating temperatures
-40° to 158° F (-40° to +70° C)
Operating humidity
Up to 95% relative humidity
Frequency band
2.4 05 to 2.475 GHz ISM (industrial, scientific, and medical) band
Modulation
Direct Sequence Spread Spectrum
Data integrity
Verified in every data message
Compatibility
Description
Electric meters
OpenWay CENTRON
Hardware versions 1.5, 2.0, and 3.0
System release firmware version SR2 SP5 and later
Gas modules
2.4GZ OpenWay Gas Module (direct mount or remote)
Model OWG-5002-xxx with ZigBee Smart Energy
Model OWG-5001-xxx with Itron Private Profile