User's Manual

Before You Begin
TDC-0832-001 2.4ZR OpenWay® Range Extender Installation Guide iv
Proprietary and Confidential
Before you begin installation, verify you have the following equipment and tools. 2.4ZR OpenWay Range
Extender installation requires the 2.4GZ OpenWay gas module's location and serial number.
Materials Available From Itron
2.4ZR OpenWay Range Extender (OWR-1001-001)
Itron magnet (MSE-0159-003)
Itron programming device
FC300 with SRead (or a laptop computer) with Endpoint-Link or Endpoint Link Pro version 5.5 or
higher or Field Deploym
e
nt Manager (FDM) software version 1.1 or higher
or
FC200 (with Bluetooth-enabled) handheld computer loaded with Endpoint-Link or Endpoint-Link Pro
software or Field Deployment Manager (FDM) software version 1.1 or higher
and
OpenWay Belt-clip Radio with Endpoint-Link or EndPoint-Link Pro software or Field Deployment
Manager (FDM) software version 1.1 or higher.
OpenWay Belt Clip Radio (AMI-0100-201)
2.4GZ OpenWay Gas Module Installation Guide - Direct Mount (TDC-0816-xxx)
2.4GZ OpenWay Gas Module Installation Guide - Remote Mount (TDC-0838-xxx)
Equipment Provided by You
Screwdriver
1/8-inch drill bit and drill
Before You Begin