User's Manual

2.4ZR OpenWay Range Extender Configuration and Installation
TDC-0832-001 2.4ZR OpenWay® Range Extender Installation Guide 10
Proprietary and Confidential
Selecting a Mounting Location
Note Perform each procedure in the order listed in the Configuration and Installation
Checklist on page 5.
Follow these general guidelines to ensure successful results when selecting a mounting location for the range
extender.
Important Mounting is only temporary at this time because you may need to move the range
extender to a different location during Linking to a CENTRON Meter on page 11 and Linking
to a 2.4GZ OpenWay Gas Module on page 12. Do not drill holes or use a method that
damages surfaces until the final location is verified.
If you can mount the range extender within sight of the meter and the gas module, the location is most
likely adequate.
Select a location for the range extender where physical barriers and obstructions (for example, buildings,
bushes, vehicle parking) between the electric meter and the gas module are minimal. If possible, choose a
range extender location above any obstructions.
Determine the best range extender mounting position based on available mounting surfaces.
Consult and follow your company's guidelines for installing equipment. Request permission from property
owners before permanently installing the range extender on private property.
Caution You must mount the 2.4ZR OpenWay Range Extender with the label arrow
pointing up.