User's Manual

2.4ZR OpenWay Range Extender Configuration and Installation
TDC-0832-001 2.4ZR OpenWay® Range Extender Installation Guide 7
Proprietary and Confidential
Configuring the 2.4ZR OpenWay Range Extender
Note Perform each procedure in the order listed in the Configuration and Installation
Checklist on page 5.
The range extender and the gas module must have the same network configuration settings. You may
configure the range extender before deployment in the field. Configuration must be completed before the final
field installation.
Configure the range extender communications parameters with a Bluetooth-enabled FC200 or FC300
handheld computer (or a laptop computer) loaded with Endpoint-Link or Endpoint-Link Pro or FDM
software, the OpenWay Belt Clip Radio, and the same configuration files used to program the 2.4GZ
OpenWay Gas Module during module installation. See the Endpoint-Link Endpoint Programming Guide
(TDC-0744) or Field Deployment Manager Endpoint Tools Mobile Application Guide (TDC-0934) for more
complete programming information. An Itron magnet is also required to initiate communication between the
range extender and other devices.
FC300 Handheld FC200 Handheld OpenWay Belt Itron Magnet
Computer Computer Clip Radio