User's Manual Part 2

TDC-0838-001 2.4GZ OpenWay Gas Module Installation Guide - Remote Mount 71
Proprietary and Confidential
This chapter provides the instructions to install Remote 2.4GZ OpenWay remote mount gas modules (Itron
part number OWG-5001-501 and OWG-5002-501 with 2.5 foot cable and encoder) on curb diaphragm gas
meters where a direct mount endpoint is not possible. Reference the Itron Gas Endpoint Meter Compatibility
List (PUB-0117-002 or the 2.4GZ OpenWay Remote Mount Gas Module Meter Compatibility List on page 3
for compatible curb diaphragm meters.
Materials Available from Itron
The following items are required for each 2.4GZ OpenWay remote mount gas module installation to a curb
diaphragm gas meter:
Itron Part Number
Description
OWG-5001-501
OWG-5002-501
2.4GZ OpenWay Remote Mount Module -
IPP
2.4GZ OpenWay Remote Mount Module -
SEP
CFG-0081-001
Remote Mount Encoder Kit
A Acetone applicator stick
B Tamper Seals
C Cable ties
D Mounting screws
E Hub spacer
F Magnet hub
013-1723-112
Encoder Spacing Tool
(Use the Encoder Spacing Tool to ensure the
encoder mounts the correct distance from the
magnet hub on the meter index.)
CFG-2400-501
American Curb Meter Installation Kit
C H A P T E R 6
Curb Diaphragm Meter Installation