User's Manual Part 1

TDC-0838-001 2.4GZ OpenWay Gas Module Installation Guide - Remote Mount 1
Proprietary and Confidential
2.4GZ OpenWay remote mount gas modules are radio-frequency (RF) devices operating over the 2.4 GHz
frequency. The 2.4GZ OpenWay remote mount gas modules communicate with ZigBee
®
-compliant electric
meters to transmit gas consumption data. Modules can store 40 days of hourly intervals and are programmed
to bubble-up every 12 or 24 hours. Alternatively, the 2.4GZ OpenWay remote mount gas module can be
awakened with an Itron magnet for programming or for binding to an OpenWay electric meter. When 2.4GZ
Openway gas modules are installed alongside Itron OpenWay electric meters, the OpenWay solution for
combo gas and electric utilities provides unprecedented management flexibility.
This installation guide provides step-by-step instructions to install the 2.4GZ OpenWay remote mount gas
module on a wide variety of meters. 2.4GZ OpenWay remote mount gas module compatible meters are listed
in the Meter Compatibility List.
Transmission Modes
The 2.4GZ OpenWay remote mount gas module can be set to transmit to Standard, Daily or Hourly Mode.
Standard Mode. The 2.4GZ remote mount gas module transmits the current index read and Daily Freeze
Time read; Daily Freeze Time read is programmable for any hour.
Daily Mode. In addition to transmitting Standard Mode information, the 2.4GZ remote mount gas module
transmits 40 days of daily interval data based on Daily Freeze Time reads.
Hourly Mode. In addition to transmitting Standard Mode information, the 2.4GZ remote mount gas
module transmits the last 24 hourly intervals.
C H A P T E R 1
2.4GZ OpenWay Remote Mount Gas Module Installation