User's Manual Part 1

Electronic Instrument Installation
TDC-0838-001 2.4GZ OpenWay Gas Module Installation Guide - Remote Mount 41
Proprietary and Confidential
To wire the 2.4GZ OpenWay remote mount gas module to the Mercury Instrument
1. Insert the module cable into the instrument's compression connector.
2. Strip one inch of the outer insulation from the 2.4GZ OpenWay remote mount gas module. Strip 1/4-inch
individual wire insulation from the red, white, and blue lead wires.
A White wire
B Blue wire
C Red wire
Caution Keep wires away from the rotating magnetic spindle in the Mercury Instrument.
3. See Mounting the 2.4GZ OpenWay Remote Mount Gas Module on page 8 for module mounting
instructions.