User's Manual Part 1

Rotary Meter Installation
TDC-0838-001 2.4GZ OpenWay Gas Module Installation Guide - Remote Mount 32
Proprietary and Confidential
To mount the 2.4GZ OpenWay remote mount gas module on the Romet ECM2 meter
1. Remove the module screw from the back of the ECM2 meter and discard.
2. Insert the mounting screw fitted with the three lock washers. Two lock washers are used as spacers as
shown.
3. Attach the mounting plate to the meter. Insert the mounting screw where the module screw was
removed. Torque the mounting screw to 5 - 7 ft.lbs. to secure the plate to the Romet meter.