User's Manual Part 1

Rotary Meter Installation
TDC-0838-001 2.4GZ OpenWay Gas Module Installation Guide - Remote Mount 20
Proprietary and Confidential
Required Installation Materials Available from Itron
The materials in the following table are required to install a 2.4GZ OpenWay remote mount gas module.
Itron Part Number
OWG-5001-503
OWG-5002-503
Note: this remote mount endpoint comes
standard with 12" lead wires and may be
shipped directly to the meter manufacturer for a
factory-installed cable (interface).
Important The interface cable must be purchased directly from the meter manufacturer.
CFG-0005-003
Remote Endpoint Mounting Kit
Connecting the 2.4GZ OpenWay Remote Mount Gas Module to
the Rotary Meter Cable
You may ship the Itron 2.4GZ OpenWay remote mount gas module directly to the meter manufacturer for a
factory-installed cable. If you connect the endpoint to the meter using an existing cable purchased from the
meter manufacturer, complete the following cable installation procedure.
Caution The purchased cable must have a mating connector compatible to the meter receptacle.
Dresser ROOTS
®
cables may be wired in different configurations for specific applications. If
necessary, contact Dresser ROOTS
®
Meters for wiring diagrams for your specific application.