User's Manual

TDC-0909-004 100W and 100WP Datalogging ERT Module Installation Guide 1
Proprietary and Confidential
Document Conventions
Convention
Example
Itron product part numbers are noted in
parentheses.
To install the ERT module (ERW-1300-XXX), do the following steps.
Hypertext links are in blue.
See How The Document is Organized on page 2 for document structure
information.
Note A Note indicates neutral or positive information that stresses or
supplements important points of the main text. A note supplies information that
may apply only in special cases.
Caution A Caution advises users that failure to take or avoid a specified action
could result in a loss of data.
Warning A Warning advises users that failure to take or avoid a specified
action could result in physical harm to the user or the hardware.
Document Purpose
This document provides the installation instructions for the 100W and 100WP. Mounting options for the
100W and 100WP ERT module include rod mount, wall mount, through-lid (remote antenna), and shelf-
mount installation. For available model configuration, see 100W and 100WP Models on page 4.
An optional Itron Leak Sensor is available for all three configurations to provide leak monitoring capability.
100W and 100WP ERT module configurations provide an easy interface to several register types. The 20-inch
cable variant allows meter manufacturers to mount the ERT module directly to their respective meter registers
before delivery to the installer.
Caution Installing an integrated 100W or 100WP ERT module and meter register in a water pit box
reduces the ERT module's RF signal distance significantly. If read reliability is a problem, install a
remote antenna or select a new installation method.
C H A P T E R 1
Before You Begin