User's Manual

TDC-0909-004 100W and 100WP Datalogging ERT Module Installation Guide 45
Proprietary and Confidential
Symbols & Numbers
100W and 100WP ERT module mounting
accessories, 12
100W and 100WP models, 4
100W and 100WP transmission modes, 5
100W and 100WPs with integral connectors, 13
100W encoder start-up, 7
100W operating modes, 5
100WP operating modes, 6
100WP pulser start-up, 8
A
about the 100W and 100WP ERT module, 3
B
base mount installation, 19
battery life, 4
before you begin, 1
C
connecting the 100WP to a remote meter register,
10
connecting to a meter register using a cable, 8
connecting to a meter register using the inline
connector, 8
H
how this document is organized, 2
I
initializing the 100W, 7
installing in a new lid, 26
installing the 100W and 100WP ERT module, 12
installing the remote antenna, 35
installing, connecting, and programming the ERT
module, 7
O
optional direct connect remote antenna installation,
34
optional Leak Sensor installation, 26
P
pipe preparation, 30
programming the 100WP, 8
R
related documents, 2
required equipment, 27
required mounting tools and hardware, 17
required tools and hardware, 14, 21
rod mount installation, 13
S
shelf mount installation, 20
T
through lid mount required tools and hardware, 23
troubleshooting, 44
U
using an extension cable, 10
using an inline connector, 39
using the Itron splice kit, 41
V
verifying 100W and 100WP operation, 11
W
wall mount installation, 17
Index