User's Manual

Installing the 100W and 100WP ERT Module
TDC-0909-004 100W and 100WP Datalogging ERT Module Installation Guide 27
Proprietary and Confidential
Leak Sensor Installation Equipment
Equipment
Itron Part Number
Description
Leak Sensor
LDS-0001-002
LS with inline connector, environmental connector cap; 5-foot
cable, and mounting bolt (fits up to 1 1/2-inch OD pipe).
Optional mounting bracket
CFG-0349-002
Mounting bolt fits up to 2 1/2-inch OD pipe.
ERT module
100W three-port encoder ERT module
ERW-1300-203
Three-port encoder ERT module for connection to register,
Leak Sensor, and optional remote antenna.
100W, 5 ft. flying leads, three-port
encoder ERT module
ERW-1300-206
Three-port encoder ERT module for connection to register using
5 ft. flying leads, Leak Sensor and optional remote antenna
connection with inline connectors.
100W, 20-in. flying leads, three-port
encoder ERT module
ERW-1300-218
Three-port encoder ERT module for connection to register using
20-in. flying leads, Leak Sensor, and optional remote antenna
connection with inline connectors.
100WP three-port pulser ERT module
ERW-1300-209
Three-port pulser ERT module for connection to register, Leak
Sensor, and optional remote antenna.
100WP, 5 Ft. flying leads, three-port
pulser ERT module
ERW-1300-212
Three-port pulser ERT module for connection to register using 5
ft. flying leads, Leak Sensor and optional remote antenna
connection with inline connectors.
100WP, 20-in. flying leads, three-port
pulser ERT module
ERW-1300-220
Three-port pulser ERT module for connection to register using
20-in. flying leads, Leak Sensor and optional remote antenna
connection with inline connectors.
25-foot extension cable (optional)
CFG-0349-101
25-foot cable with coordinating connectors (LS blue connector,
register black connector).
100W universal environmental
replacement cap
MSC-0019-008
Protects Leak Sensor connector when the Leak Sensor is not
connected to the 100W ERT module.
Itron Security Seal
MSC-0018-001
Indicates module tampering and ensures the protective cover
stays intact.
Leak Sensor Standard mounting 100W three-port 100W 20-in. cable Optional mounting
bracket bracket
Warning When the 100W or 100WP is installed but the Leak Sensor is not attached, you must
protect the blue Leak Sensor port with the environmental cap (MSC-0019-008). If you remove the
Leak Sensor from the ERT module, the environmental cap must be replaced to protect the connector.