User's Guide

TDC-0909-003 100W and 100WP Datalogging ERT Module Installation Guide 44
Proprietary and Confidential
Symbols & Numbers
100W and 100WP ERT module Accessories, 12
100W and 100WP ERT modules with Integral
Connectors, 12
100W and 100WP Models, 4
100W and 100WP Transmission Modes, 5
100W Encoder Start-up, 10
100W Operating Modes, 5
100WP Operating Modes, 6
100WP Pulser Start-up, 11
A
About the 100W and 100WP ERT module, 3
B
Base Mount Installation, 19
Battery Life, 4
Before You Begin, 1
C
Connecting the 100WP to a Remote Meter
Register, 9
Connecting to a Meter Register Using a Cable, 7
Connecting to a Meter Register Using the Inline
Connector, 7
H
How This Document is Organized, 2
I
Initializing the 100W, 9
Initializing, Connecting, and Programming the
ERT Module, 7
Installing and Connecting, 7
Installing in a New Lid, 25
Installing the 100W and 100WP ERT module, 12
Installing the Remote Antenna, 35
O
Optional Leak Sensor Installation, 26
P
Pipe Preparation, 30
Programming the 100WP, 10
R
Related Documents, 2
Remote Antenna Installation, 34
Required Base Mounting Tools and Hardware, 19
Required Equipment, 26
Required Tools and Hardware, 14, 17, 20, 22
Rod Mount Installation, 14
S
Shelf Mount Installation, 20
T
Through Lid mount, 22
To connect the 100W to the register, 8
To connect the inline connector, 38
To connect the Leak Sensor to the 100W and
100WP ERT module, 27
To connect the remote antenna to the ERT module,
36
To install a Security Seal through the protective
connector cover, 13
To install in lids with holes using the Pit Lid
Mounting Kit (CFG-0771-011), 23
To install the 100W and 100WP ERT module on a
rod, 15
To install the 100W and 100WP ERT module
using the base mount procedure, 19
To install the 100W and 100WP ERT module
using the wall mount procedure, 17
To install the 100W in new lids, 25
To install the Leak Sensor on a pipe (up to 2 1/2-
inch OD), 32
To install the Leak Sensor on a pipe or meter
insetter, 30
To install using the shelf mount adapter, 21
Troubleshooting, 43
U
Using an Extension Cable, 9
Using an Inline Connector, 38
Using Gel Cap Connectors and the Itron Splice
Kit, 40
Index