User's Guide
Table Of Contents
- Contents
- Before You Begin
- About the 100W and 100WP Datalogging ERT Module
- Connecting, Initializing, and Programming the ERT Module
- Installing the 100W and 100WP ERT Module
- Remote Antenna Installation
- Using an Inline Connector
- Using Gel Cap Connectors and the Itron Splice Kit
- Troubleshooting
- Index
Remote Antenna Installation
TDC-0909-003 100W and 100WP Datalogging ERT Module Installation Guide 36
Proprietary and Confidential
2. Insert the antenna connector through the rectangular opening in the threaded collar.
3. Turn the threaded collar until it is tight against bottom of the pit lid.
To connect the remote antenna to the ERT module
1. Align the connector pins with the top, red connector on the ERT module.