User's Guide

TDC-0909-003 100W and 100WP Datalogging ERT Module Installation Guide 34
Proprietary and Confidential
The 900 MHz remote mount antenna provides increased RF range coverage for the listed mobile applications
where the meters are located deep in a pit boxes.
This section provides antenna mounting instructions through a pit lid and the instructions to connect the
antenna to the ERT module.
Caution Only remote antenna ERT modules can be used with the remote antenna. See the
following table for 100W and 100WP remote antenna ERT models.
100W and 100WP Remote Antenna Models
100W and 100WP ERT Module Description
Itron Part Number
100W Encoder, with Remote Antenna, integral connector ERW-1300-118
100WP Pulser, with Remote Antenna, integral connector ERW-1300-119
Industry Canada Conformity
This radio transmitter (IC:864D-100WB) has been approved by
Industry Canada to operate with the antenna types listed below
with the maximum permissible gain and required antenna
impedance for each antenna type indicated. Antenna types not
included in this list, having a gain greater than the maximum gain
indicated for that type, are strictly prohibited for use with this
device.
Le présent émetteur radio (IC: 864D-100WB) a été approuvé par
Industrie Canada pour fonctionner avec les types d'antenne
énumérés ci-dessous et ayant un gain admissible maximal et
l'impédance requise pour chaque type d'antenne. Les types
d'antenne non inclus dans cette liste, ou dont le gain est supérieur
au gain maximal indiqué, sont strictement interdits pour
l'exploitation de l'émetteur.
Specification
Part number CFG-0900-003
Gain 7.0 dBi
Horizontal beamwidth Omnidirectional
Impedance 50 ohms
Termination Proprietary
C
HAPTER
5
Remote Antenna Installation