User's Manual

Installing the 100W Endpoint
TDC-0909-002 100W and 100WP Pit Datalogging Water Endpoint Installation Guide 18
Proprietary and Confidential
Shelf Mount Installation
This section describes 100W endpoint installation using a shelf mount adapter to mount the endpoint in a pit
lid slot.
Caution Observe the following guidelines for mounting the 100W using the wall mount
procedure:
Endpoint positioning other than upright could negatively affect radio
performance and battery life.
Use only Itron-approved splice kits or inline connectors.
The pit lid and slot must have the correct dimensions for the 100W or 100WP assembly to fit
properly.
The following illustration and the accompanying table give pit lid slot dimensions for the shelf mount
installation method.
Pit Lid Slot Dimensions
Dimension
Minimum
(inches)
Maximum
(inches)
A
6 3/4
N/A
B
2
5 3/4
C
3/4
1
Required Tools and Hardware
Itron 100W Shelf Mount Kit