User's Manual

Optional Remote Antenna Installation
TDC-0909-002 100W and 100WP Pit Datalogging Water Endpoint Installation Guide 33
Proprietary and Confidential
To mount the optional remote antenna through a pit lid
1. Insert the remote antenna into the pit lid hole with the convex surface on the top of the pit lid. (These
instructions show a simulated pit lid material.)
2. From the bottom of the lid, screw on the threaded collar two or three turns. Turn the threaded collar until it
is tight against bottom of the pit lid. Verify the antenna dome does not move up and down or shift laterally
.
Note Ensure the beveled edge (1) of the threaded collar is toward the top of the lid (2). The Itron-
recommended placement centers the remote antenna and takes up the extra space in mounting holes up to
2-1/2-inches.