User's Manual

TDC-0909-000 100W Datalogging Endpoint Installation Guide 35
Proprietary and Confidential
Symbols & Numbers
100W Datalogging Endpoints with Integral
Connectors • 9
A
About the 100W Datalogging Endpoint • 3
B
Base Mount Installation • 16
Battery Life • 3
Before You Begin • 1
C
Connecting to a Meter Register Using a 5-foot
Cable • 5
Connecting to a Meter Register Using the Inline
Connector • 5
H
How This Document is Organized • 1
I
Initializing and Connecting the 100W
Datalogging Endpoint • 5
Installing and Connecting • 5
Installing the 100W Datalogging Endpoint • 9
M
Mounting the Remote Antenna • 29
O
Operating Modes • 4
Optional Leak Sensor Installation • 20
Optional Remote Antenna Installation • 29
P
Pipe Preparation • 23
R
Required Base Mounting Tools and Hardware •
16
Required Equipment • 20
Required Tools and Hardware • 11, 14, 17
Rod Mount Installation • 10
S
Shelf Mount Installation • 17
T
To connect the 100W to the register • 6
To connect the inline connector • 33
To connect the Leak Sensor to the 100W • 21
To connect the remote antenna coupler to the
100W • 30
To initialize the 100W • 5
To install a cable tie to the connector • 10
To install the 100W on a rod • 11
To install the 100W using the base mount
procedure • 16
To install the 100W using the wall mount
procedure • 14
To install the Leak Sensor on a pipe (up to 2 1/2-
inch OD) or meter insetter • 26
To install the Leak Sensor on a pipe or meter
insetter • 24
To install using the shelf mount adapter • 18
U
Using an Extension Cable • 6
Using an Inline Connector • 33
V
Verifying Operation of the 100W Endpoint • 7
W
Wall Mount Installation • 14
Index