User's Manual
Table Of Contents
- Before You Begin
- About the 100W Datalogging Endpoint
- Initializing and Connecting the 100W Datalogging Endpoint
- Installing the 100W Datalogging Endpoint
- Optional Remote Antenna Installation
- Using an Inline Connector
- Index
Pipe Preparation
TDC-0909-000 100W Datalogging Endpoint Installation Guide 23
Proprietary and Confidential
To attach an Itron Security Seal through the connector security hole
1. Insert the pointed end of the Security Seal through the inline connector and the 100W
connector security holes.
2. Insert the pointed end of the security seal into the capped end and push until the seal
locks.
This completes 100W and Leak Sensor connections.
Pipe Preparation
Clean any dust or dirt from the pipe to facilitate direct contact with the LS surface.