User's Manual
Table Of Contents
- Before You Begin
- About the 100W Datalogging Endpoint
- Initializing and Connecting the 100W Datalogging Endpoint
- Installing the 100W Datalogging Endpoint
- Optional Remote Antenna Installation
- Using an Inline Connector
- Index
Chapter 4 Installing the 100W Datalogging Endpoint
22 TDC-0909-000 100W Datalogging Endpoint Installation Guide
Proprietary and Confidential
4. Rotate the connector locking ring until the security holes align.
Caution Do not force the connector ends together. While holding the LS connector,
engage the 100W connector by rotating the locking ring until both connectors securely
connect. Twist only the connector locking ring, not the body of the connector.
Twisting the connector body could damage the connector's pins.
Attaching an Itron Security Seal
Required Materials
Itron Security Seal (MSC-0018-001)