User's Manual
Table Of Contents
- Before You Begin
- About the 100W Datalogging Endpoint
- Initializing and Connecting the 100W Datalogging Endpoint
- Installing the 100W Datalogging Endpoint
- Optional Remote Antenna Installation
- Using an Inline Connector
- Index
Chapter 4 Installing the 100W Datalogging Endpoint
18 TDC-0909-000 100W Datalogging Endpoint Installation Guide
Proprietary and Confidential
To install using the shelf mount adapter
1. With the foam spacers facing up, insert the shelf mount adapter into the opening in the
disk.
2. Push the adapter into the opening gently until the adapter snaps into place. Insert the
shelf mount adapter into the 100W antenna slot pushing firmly with your thumb until
the adapter tab locks into place in the opening of the 100W antenna slot.