User's Manual

Shelf Mount Installation
TDC-0909-000 100W Datalogging Endpoint Installation Guide 17
Proprietary and Confidential
Shelf Mount Installation
This section describes 100W installation using a Shelf Mount Adapter to mount the
endpoint in a pit lid slot.
Caution Observe the following guidelines for mounting the 100W using the
wall mount procedure:
Endpoint positioning other than upright could negatively affect
radio performance and battery life.
Do not use gel connectors in pit environments.
Use only Itron-approved splice kits or inline connectors.
The pit lid and slot must have the correct dimensions for the 100W assembly to
fit properly.
The following illustration and the accompanying table give pit lid slot dimensions for the
shelf mount installation method.
Pit Lid Slot Dimensions
Dimension
Minimum
(inches)
Maximum
(inches)
A
6 3/4
N/A
B
2
5 3/4
C
3/4
1
Required Tools and Hardware
Itron 100W Shelf Mount Kit