User's Manual

Electronic Instrument Installation
4. The status indicator in the lower left corner of the MasterLink SQL software displays the connection
status as Connected (instrument type).
5. To view an Item configuration, select Display > Items by Number.
Important Refer to the Itron 100G Series Remote ERT Module Meter Compatibility List on page 4
for
the required Honeywell Instrument settings.
6. Verify the Honeywell instrument settings are correct. For example, Item number 56 must be set to 2.0. If
the setting is incorrect, click the Change button.
A Change Item pop-up provides the interface to change the setting.
7. Enter the correct setting. Click Save.
TDC-0824-014 100G Series Gas ERT Module Installation Guide, Remote Mount 51
Proprietary and Confidential