User's Manual

Electronic Instrument Installation
8. Click Yes to change the site ID or click No to connect to the remote unit without changing the site ID. If
you selected Yes, the Change RTU Site ID window opens.
The current site ID displays in the Current SiteID: field.
9. Enter the new SiteID or select an ID from the Enter the new RTU SiteID field. The ID range is 2 to
59999.
10. Click OK to send the updated ID to the remote ERT module.
11. Click Cancel to cancel the ID change.
12. Click View/Config.
The Field Manager window opens and displays the settings for the current connection.
13. Click the Setup Parameters tab at the bottom of the parameters window.
A parameters window opens.
TDC-0824-014 100G Series Gas ERT Module Installation Guide, Remote Mount 65
Proprietary and Confidential